Plumbing DIY Tools Every Homeowner Should Own


Every homeowner should own these 5 tools when it comes to tackling your own DIY plumbing tasks. From clogged sinks and showers. Replacing old pipes. These 5 tools will allow you to tackle the majority of household plumbing tasks. You can buy all of them for less than $150 combined, which is less than you’d spend on a plumber for single visit.


Watch this video on the top 5 DIY plumbing tools.

If all else fails, we at DrainBusters are here to help!!!  Schedule online or give us a call.

Why Grease Traps Are a Must for Those Kitchen Sinks

By Dez Duran-Lamanilao

One of the most common problems facing kitchen sinks is the accumulation of grease or oil residues down the tube. Even if your plumber has probably warned you to avoid such materials from being poured into the pipe, over time it becomes habitual or just simply becomes unavoidable. Thus, the need to use grease traps.









Grease traps are also known as grease interceptors or grease converters. The Uniform Plumbing Code (UPC) differentiates grease traps from grease interceptors based on the waste water flow rate that can be dealt with by the device. Grease traps can handle less than 50 gallons per minute while grease interceptors can handle more than 50 gallons, thus they are more common in commercial or industrial establishments.

Grease traps can reduce the amount of fats, oils and greases (FOGs) and other solid waste materials by restricting their flow before they enter the waste water disposal system. Thus, the risks of drain and sink blockages are reduced. Solids that will be accumulated or remain deposited on the bottom of grease traps are then removed during grease trap cleaning and maintenance. Grease traps can be emptied when the sludge fills a quarter of the tank. Regular cleaning should always be observed to avoid rotting of FOGs, which could result in odor or gas build-up.

The grease trap installation process usually involves identifying the size of the grease trap that you require, determining where to install it, and connecting the parts, which may vary from one manufacturer to another.  Unlike their commercial counterparts, residential grease traps are much easier to install and clean, but getting an expert to do these tasks will ease your worries on whether you are doing it the right way or missing out on something important. Still have questions? Ask a plumber now and get that needed protection for your waste water disposal system.


3 Mistakes You Should Avoid When Clearing A Clogged Sink

By Arnold Obat


Image Source: Trade Winds Imports

Whether you like it or not, you are going to have and experience draining problems at your home. One such problem is clogged sinks. If you have experienced a clogged sink, whether it’s in your bathroom or kitchen sink, then you know how annoying it can be. Luckily, you can easily break up any blockage at your home yourself without necessarily seeking the assistance of a professional plumber. However, there are a few dos and don’ts of clearing a clogged sink that you should know before embarking on your drain cleaning process. This post will highlight the top mistakes you should avoid when clearing a clogged sink.

Avoid Buying Drain Cleaners from Your Local Grocery or Hardware Store

In most cases, drain cleaners offered at your local grocery or hardware store work on slightly clogged sinks. Furthermore, if these drain cleaners do end up working you will find that the sinks will be unclogged for a very short time maybe a day or two. With that in mind, it’s very important that you avoid getting your drain cleaners from your local grocery or hardware store. If you are not sure about a drain cleaner, simply get in touch with a professional plumber and he or she will assist you accordingly.

Avoid Pouring Hot Water & Vinegar on Your Clogged Sinks

One thing I would like to point out right away is that this method actually does work when it comes to unclogging your clogged sink. However, it does have a very big negative and that is the fact that if you pour hot water and vinegar on your clogged sinks it will eventually end up damaging your drain pipes,  leading to leaks thus bringing about other unwanted drainage problems that will definitely cost you a lot of money to fix. Furthermore, pouring hot water on your clogged sink can only makes matters worse because in some cases, especially when you use hot water alone, it ends up sitting on the bottom of your sink without doing anything, therefore, making matters worse.

Avoid Using Excessive Force When Plunging

Using excessive force when plunging is another drain-cleaning mistake you should avoid when clearing a sink. When you exert too much force when unclogging your sinks, it can result in you damaging your home’s drain line connection, which ultimately leads to leaks that as we all know causes serious plumbing issues that need extensive work that in most cases end up costing you a lot of money. While still on matters force, avoid using a drain bladder when unclogging your sink as it too brings with it excessive force or pressure.


There you have it, 3 drain-cleaning mistakes you should avoid when clearing a clogged sink. All-in-all, always remember to get in touch with a professional plumber if you are not sure on how to go about clearing a clogged sink. If you happen to have any questions regarding this topic, feel free to interact with us in the comment section below or simply contacting one of our professional plumbers and they will assist you accordingly.

Are Your Plumbing Pipes Worn Out? Here Is How To Find Out

By Arnold Obat

Plumber in Houston, TX

Image Source: Pinterest

Plumbing pipes, just like any other object that is constantly in use can be worn out over a period of time and as such, it’s very important that you inspect them from time to time especially if you are living in an old house.

Before conducting an inspection, make sure that you know exactly what you are doing and what to look for. If you don’t know what to do during the inspection, then you will find this post to be of great value to you as it will show you how to check whether your plumbing pipes are worn out in 4 simple steps.

That said, make sure you get help from a professional plumber if you feel you need an expert’s perspective on your plumbing pipes.


The first thing you want to do when doing the inspections is check for any leaks. Leaks, as you already know, tend to be problematic and in most cases, they do end up causing serious damages that require extensive repairs if not looked into.

Checking for leaks is simple all you have to do is simply look out for an accumulation of mildew or molds. In general, these two tend to thrive in moist environments and as such, you are likely going to find them where there is a leak in your home. You can use this method to inspect hard to reach plumbing pipes like ones placed behind a wall or under the floor.

Stains or Warping

In addition to leaks, you can also inspect your home for any worn out plumbing pipes by simply checking for stains. When checking for stains, there are certain areas you need to focus on and they are underneath the sink, in the bathtub, the wall and lastly the ceiling.

If at any point during your inspection you happen to notice a stain, then that simply implies that you have worn out plumbing pipes that need repair. Consider seeking help from a professional plumber if you notice stains or warping in your home.


Checking for corrosions is another trick you can take up when you choose to inspect your home for worn out plumbing pipes. When doing the corrosion inspection there are certain things you should look out for and they are pimples, flaking, discoloration, and dimpling.

If you find any of these, rest assured that there is corrosion and as such, it’s time to replace worn out plumbing pipes. This method can prove to be a bit problematic so feel free to get in touch with a plumber for further details on how to go about it.

Water Discoloration

Water discoloration can help you a lot during the inspection of your home’s plumbing pipes. However, it’s good to point out that it tends to work best after you’ve been out of the house for a while, may be you were on a vacation, or on faucets that haven’t been used for some time.

What are you looking for? Well, you are simply looking for discolored water. If you do find discolored water when you open any faucet in your house, then this an indication that it’s time to change your plumbing pipes.

The discolored water you seeing pouring out from the faucet imply that rust is present in your pipes and thus the water discoloration. In some cases, the rust that accumulates tend to harden the water and as a result end up affecting its taste. This, if not dealt with in good time, can end up resulting in serious health problems for anyone using contaminated water.

As mentioned in the beginning of this post, the work of inspecting plumbing pipes to check whether they are worn out is something that should be done by homeowners on a regular basis. If you happen to come across something that you are unsure of during the inspection, then do contact a professional plumber and let him/her assist you where necessary. Lastly, always ensure that you fix your pipes in good times in order to avoid any serious plumbing pipe problems in future.